| This article is based on a
message written by Simon Williams |
||
| To record the output from a PSR740 to a
audio CD you need to take the original sound from the PSR740
and connect the audio outputs of the psr740 to the LINE
INPUT socket on the soundcard. For this a pair of mono 1/4 inch jack plugs must be connected to a stereo 3.5mm jack plug. The 2 mono jack plugs go to the left and right outputs of the psr740, the stereo 3.5mm plug fits into the soundcard. Once this is done, you will need a program on the PC to sample from the line input of the soundcard and save it as a WAVE file. |
The creative sound cards come with a
program called WAVESTUDIO which does this, otherwise you
will need to refer to what software and utilities came
with your soundcard. The process is to start the programme on the PC recording first (so that it records the line input sound directly to your harddisk) and then straight away start your PSR740 playing its song. Once the song finishes, stop the PC recording and save the wave file. Finally you need to use a program to write the wave file to a cd as an audio file. The software delivered with your CD creator is most probably able to do this. |
|